Important Information on the Happycut by Artemio, A4 die cutting Machine.

Hi guys,

Well 2 things to talk about in this post................
1. Using the new Spellbinders M-Bossibilities folders
2. Make sure you are using the right plates for the ordinary Folders, Artemio's Information Booklet is WRONG!
1. I knew the new M-Boss folders were going to cause a bit of a problem, when Spellbinders had to release a new plate just for it! Then people started receiving them, and were asking me what plates to use, so I gave them 2 answers..........either a Cuttlebug B plate, or a piece of board, like some mount board.
Well I know I got one of the answers right as I received my M-boss folder today from MCS, and I used the Cuttlebug B plate, and it worked, yippee!
so sandwich for the M-boss is: Cuttlebug B plate, if you already have one, or they are only about £6.00 on the web for a pair, and one of the following plates:
A Plate, white, or
B Plate Black or
SP Plate Clear.
I have listed three plates, although I use the white A plate and the bug plate. This is because your machine might be a touch different to mine, due to the pressures in each machine. I work my Happy hard, you might not, mine goes through all sorts of trials, lol, you may take more care of yours, lol.





2. Sharon from Glitter Perfect has been in touch as well and would like me to make the Following REALLY CLEAR TO ANYONE OWNING A HAPPY CUT:
The information in the Box with your Happy Cut is WRONG!
Please watch the other videos I have done on the Happy, my pride and Joy, and pay attention to the sandwiches that I say you should use for the Embossing Folders and why! Information from Sharon suggests that my Embossing Folders Video is WRONG, in all but the last Part.
If you continue to use the information from Artemio, on how to use Embossing folders with your machine, you could damage your machine!
http://youtu.be/1Ck0cgSej-k

The correct sandwich is: Black B Plate and Clear SP plate, not the white A Plate and Clear SP Plate! Please switch to the black and clear plates instead.
Sharon wrote: " I love my machine too and only decided to stock it after I had my machine several months.  The documentation for the HappyCut is wrong however.  When using embossing folders, you should only use the Black Embossing plate and the SP Adapter Plate.  Continued use with the A Plate and the Black Embossing plate can strain the machine."


Hope this helps you, you can find links to my videos on the Happy in the top of the bar that runs down the <<<< Left of this page. over in the direction the arrows are pointing, <<<<
If you need help or have a question, then either leave a comment or you can find my Address on the contact me tab!


xxx




Lou